Hardware Installation and Reference Guide Product Overview
8
10/100/1000BASE-T Ethernet RJ45 with auto negotiation. Connect the WAN
port to the DSL/Cable Modem to establish an Ethernet connection.
Solid green: The port has made a successful link.
Blinking green: The port is transmitting or receiving traffic.
Note
After the router is restored to factory default settings, the default management address is http://192.168.110.1
(No password by default).
Figure 1-9 Rear Panel of an RG-EG310GH-P-E Router
Table 1-10 Rear Panel Specifications
Connect the DC power adapter to the DC input plug on the faceplate of the router
to power on the router.
1.4 Technical Specifications
1.4.1 RG-EG305GH-P-E
Table 1-11 Technical Specifications of an RG-EG305GH-P-E Router
Dual-core CPU with the clock speed of 1.35 GHz
Five 10/100/1000BASE-T Ethernet RJ45 with auto negotiation, including four LAN