Ruijie Reyee RG-NBS Series

Web-based Configuration Guide Port Management
66
Table 4-5 Description of Rate Limiting Parameters
Parameter
Description
Default Value
Rx Rate
Max Rate at which packets are sent from a port to a switch, in
kbps.
Not limited
Tx Rate
Max Rate at which packets are sent out of a switch through a
port, in kbps.
Not limited
2. Changing Rate Limits of a Single Port
In the port list for which the rate limit has been set, click Edit on the corresponding port entry, enter the ingress
rate and egress rate in the displayed dialog box, and click OK.