The APP prompts that the level calibration is successful, the front
light becomes steady white, and the rear light becomes steady blue;
indicating that the calibration is complete.
After the calibration is completed, "Fly" is displayed in the APP,
and you can now prepare to take off.
Calibrate the gyroscope / level
Make sure that the aircraft is placed on a level ground and there is
enough space under the camera.
Push the left and right joysticks to the "11 o'clock" and "1 o'clock"
positions respectively.
The front white and back blue lights flash quickly, the camera
rotates up and down again for self-checking, and the App displays
horizontal calibration.
⑤
④
①
②
③
The aircraft is placed on the
horizontal ground, search GPS satellite
signal, search white blue light slow
flashing, signal search success, the
aircraft white blue light is always
bright, indicating star search success,
you can fly.
Level Calibration
1
F11 PRO User Manual
Copyright ©2023 Ruko All Rights Reserved.47
The aircraft must be calibrated with the compass every time it is
turned on before it can take off. After the aircraft is turned on and
the frequency is turned on, the aircraft can be calibrated in steps
②. and ③.
When the aircraft is flying in a circle or out of control in a
complex environment, the aircraft compass calibration is not
standard or interfered. Please land the aircraft manually in time
to manually calibrate the aircraft (refer to the first step of
calibrating the compass).
When calibrating the aircraft, please open the arm to avoid the
influence of the magnetic field of the motor.
To Next Page
Loading...
