RUPTELA FM-Eco4+ E S - Safety Information

5
1.4 Document Changelog
Version
Date
Modification
1.0
2018-10-01
Initial draft.
1.1
2018-05-11
Added: Description of automatic firmware update from configurator.
1.2
2018-05-14
Added: Environmental and electrical specifications in the “Safety” section.
1.3
2018-08-24
Added: Description of “Periodical redirect” in “Global settings”.
1.4
2018-10-12
Added: New devices: FM-Eco4+ S and FM-Eco4+ E S.
1.5
2018-10-23
Added: Description of sending only header information in records in “Profile
settings”.
Updated: Description of “Send identification string” in “Global settings”.
1.6
2018-11-16
Added: Description of DOUT inversion in “IO settings”.
Updated: Operating system requirements in “Sample configuration”.
1.7
2018-12-06
Updated: List of the peripheral devices in “Peripheral accessories”.
1.8
2019-01-02
Added: Description of antenna reconnection for FM-Eco4+ E S.
1.9
2019-03-08
Added: Description of profile switching notification in “Profile settings”.
Updated: LED status diagrams replaced by a table in “LED status”.
Updated: Description of “Operator list”.
Updated: Description of “Configurable navigation filtering” in “Profile settings”.
1.10
2019-05-10
Added: Description of “Use ID in SMS commands” in “Global settings”.
Added: Description of automatic APN selection settings in “Global settings”.
Added: ANATEL certification info in “Certification”.
1.11
2019-05-28
Updated: Wiring diagram for the FM-Eco4 S light.
2.0
2019-08-21
Updated: User manual structure and design.
2.1
2019-09-30
Updated: Configuration Basics.