9
C Removing the bread
H Remember that the Bread Pan and your loaf are both very hot! Be careful not to place
either on a tablecloth, plastic surface, or other heat-sensitive surface which may scorch or melt.
To remove the bread:
1. Unplug the breadmaker at the wall socket and open the Lid. Take care not to get scalded by
escaping steam.
2. Put on oven gloves and, using the handle, pull the bread pan out of the breadmaker.
3. Turn the Bread Pan upside down and shake to release the bread. Place the bread upright on a
wire rack to cool 20 to 30 minutes before cutting. This allows the steam to escape.
4. Check to see if the kneading paddle has come away with the bread. Use a nonmetal utensil
to gently remove it, taking care not to scratch the nonstick coating.
H CAUTION. The Bread Pan, Kneading Paddle and bread will be very hot.
To Next Page
Loading...
