4 MOBILE AND WORKSHOP SERIES OPERATION MANUAL
October 2018 | Version: v1-0
SAFETY RULES
GENERAL
These Hydraulic Crimping Machine are for crimping hydraulic hose and couplings made by RYCO Hydraulics. The design &
construction of this machine conforms to local and safety design standards.
Industry Standard Year Title Standard Description
DIN EN ISO 12100-1 2004 Safety of machinery Safety of machinery. Basic concepts, general principles for
design basic terminology, methodology.
DIN EN ISO 12100-2 2004 Safety of machinery Safety of machinery. Basic concepts, general principles for
design. Technical principles.
EN 414 1992 Safety of machinery Rules for the drafting and presentation of safety standards.
EN 1050 1996 Safety of machinery Risk assessment.
EN 294 1992 Safety of machinery Safety distances to prevent danger zones being reached by the
upper limbs.
EN 982 1997 Safety of machinery Safety requirements for air power systems and components -
hydraulic.
EN 60204-1 1997 Safety of machinery Electrical equipment of machines. Part 1.
EN 61000-6-2 2005 Electromagnetic Compatibility Generic emission standard.
EN 61000-6-4 2005 Electromagnetic Compatibility Generic immunity standard.
Restriction
RYCO crimping machines are electrically operated hydraulic crimping machines for hydraulic hose assemblies. Machines are
designed for single piece and low production. The crimping machine comprises a crimping head, a hydraulic unit.
Generally, these machines will be installed under the following conditions:
1. Supply voltage: 0.9 - 1.1 nominal supply voltage
2. Source frequency: 0.99 - 1.01 nominal frequency
3. Ambient temperature: 5°C - 40°C (40°F - 104°F)
4. Altitude: shall be at altitudes up to 1000m above sea level
5. Relative humidity: not exceed 50% at 40°C (104°F)
6. Atmosphere: Free from excessive dust, acid fume, corrosive gases and salt.
7. Avoid exposing to direct sunlight or heat rays which can change the environmental temp.
8. Avoid exposing to abnormal vibration.
9. Greased frequently.
These machines are designed for certain applications only. We strongly recommend that the machines are NOT modied and/or
used for any application other than for which they are designed. If you have any questions relative to its application DO NOT use
the machine until you have had detail instruction from your RYCO representative.
To Next Page
Loading...
