Ryobi Roboyagi - Troubleshooting; Mower stalls or breaks down; No power on the charging station; Mower connection error

EN
SV
DA
NO
FI
DE
FR
ES
IT
PT
NL
RU
PL
HU
CS
RO
SK
HR
ET
LT
LV
SL
BG
TR
UK
ENGLISH
17
To set up Wi-Fi manually:
1. Enter the network name.
2. Choose the security level.
3. Enter the password.
4. Press the confi rm button to connect to the Wi-Fi
connection. The product attempts to connect to
the selected network.
5. If connection is successful, a confi rmation
screen appears. Press the confi rm button to
return to the menu.
DATE/TIME SETUP
1. From the [Date/Time Setup] screen, choose the
date.
a. With [dd] highlighted, choose the day. Press the
confi rm button.
b. With [mm] highlighted, choose the month. Press
the confi rm button.
c. With [yy] highlighted, choose the year. Press the
confi rm button.
2. Choose the time.
a. With [--:] highlighted, choose the hour. Press the
confi rm button.
b. With [:--] highlighted, choose the minute. Press
the confi rm button.
3. Press the confi rm button.
MOWING ZONES
MOWING ZONE A
■ Mowing Zone A has a basic lawn layout. The lawn is
free from obstacles.
■ The robotic lawn mower can move unobstructed
from one point to another
.
■ Lay the wire 45 cm away from the perimeter edge.
MOWING ZONE B
■ Mowing Zone B has a basic lawn layout, with
obstacles.
■ The lawn is the same size as Mowing Zone A
but uses 50% more wires due to the number of
obstacles.
■ Parallel wires to and from each obstacle should
have a gap of less than 5 cm between each wire.
■ The gap between an obstacle and the perimeter
should be 90 cm minimum.
■ The gap between each obstacle should be 90 cm
minimum.
■ Lay the wire 45 cm away from the obstacles.
■ Lay the wire 45 cm away from the perimeter edge.
MOWING ZONE C
■ Mowing Zone C has an L-shaped lawn layout, with
obstacles.
■ Parallel wires to and from each obstacle should
have a gap of less than 5 cm between each wire.
■ The gap between an obstacle and the perimeter
should be 90 cm minimum.
■ The gap between each obstacle should be 90 cm
minimum.
■ Lay the wire 45 cm away from the obstacles.
■ Lay the wire 45 cm away from the perimeter edge.
MOWING ZONE D
■ Mowing Zone D has a U-shaped lawn layout, with
obstacles.
■ The two sides of the lawn are connected by a
narrow passage.
■ The narrow passage should have a width of 90 cm
minimum.
■ Lay the wire 45 cm away from the perimeter edge.
MOWING ZONE E
■ Mowing Zone E has an irregularly shaped lawn
layout, with a narrow passage in between.
■ The lawn has obstacles but has an open perimeter
(no obstacles around edges).
■ Parallel wires to and from each obstacle should
have a gap of less than 5 cm between each wire.
■ The gap between an obstacle and the perimeter
should be 90 cm minimum.
■ The gap between each obstacle should be 90 cm
minimum.
■ Lay the wire 45 cm away from the obstacles.
■ Lay the wire 45 cm away from the house.
■ Lay the wire 10 cm away from open perimeter, or
any level paving stones around the house.
MOWING ZONE F
■ Mowing Zone F has split lawns, with a narrow
passage in between.
■ Both lawns are free from obstacles.
■ The narrow passage should have a width of 90 cm
minimum.
■ Lay the wire 45 cm away from the obstacles.
■ Lay the wire 45 cm away from the perimeter edge.
MOWING ZONE G
■ Mowing Zone G has split lawns (Lawn A and Lawn
B).
■ The lawns are separate, with an obstacle in
between but with parallel wires connecting Lawn
A
to Lawn B.