From this leve it's possible to set two time bands (ON1/
OFF1, ON2/OFF2), which determine the times in which the
discount should be applied.
To program days and times follow the procedure as per the
"FREE VEND - TIME RANGE" item.
0000
This function allows the setting of a rise on the drink price, to
be applied within one week in two different time bands.
The lower line shows "INCREASE TO BE APPLIED".
To set this option follow the procedure described in chapter
"7.5
Changing and saving parameters".
Important
Discounts are settable with values varying from 10 to the
lowest drink price, with 10-by-10 steps
Applying a price rise automatically causes the opening of a
following level.
INCREASE
From this level it's possible to set two time bands (ON1/
OFF1, ON2/OFF2), which determine the times in which the
price rises should be applied.
To program days and times follow the procedure as per the
"FREE VEND - TIME RANGE" item.
To set this option follow the procedure described in chapter
"7.5 Changing and saving parameters".
RINSING
If "YES" is selected, two start up and shutdown time bands
(ON1/ OFF1, ON2/OFF2] are required.
To program days and times follow the procedure as per the
"FREE VEND -TIME RANGE" item.
Once the parameters have been set and confirmed, it's
necessary to exit the programming function.
PROGRAM Y/N
This function allows the exit from the programming function at
any time.
It's on the same leve of the five main menu items, and its
visualization requires to:
- Press the D key, the fourth from top on model D.A. 5P
(ref. 3, fig. 6) until the items from the first level are
displayed. One of the five main menu items appears. In
model D.A. 3P scroll the settings first and than the
functions with the "UP" and "DOWN" keys, until one of the
five main programming menu items appears.
- Use the "UP" and "DOWN" keys to scroll them and display
the function to exit programming.
- Press "ENTER".
A cursor flashes under the letter ".../N".
- If it is not desired to exit programming it's necessary to
press the "ENTER" key. The same item will be displayed
but without the flashing cursor, and it will be possible to
scroll 1
st
. level functions.
- If instead the intention is to exit, it's necessary to use the
"UP" and "DOWN" keys to get the cursor to appear under
the letter "...Y...", then press "ENTER".
The display will show the text set in function "TEXT
STAND-BY".
RINSING TIME
YES
This function allows the setting of two time bands within a
week, during which the machine performs automatic mixer
cleaning in sequence.
Press "ENTER" to set this option.
Important
The vending machine keeps the programmed
parameters in memory even during power failure.
21
- The application of a discount automatically causes the open-
ing of a following level.
To Next Page
Loading...
