Saeco Primea Touch Plus - Circuit Cleaning Cycles; Brew Group Wash Cycle; Display Lock Function

29
add cleaner
to milk conteiner
milk cleaning cycle
cleaning...
milk cleaning cycle
Fill the milk container with
fresh water up to the «max»
level.
7 8
Position an adequately sized
container under the milk spout.
The wash cycle starts automati-
cally.
Wait for the wash cycle to fi nish.
9
11
12
ok
Insert the container into the
drawer and close the drawer.
Close the compartment.
Press the button.
When the wash cycle has
fi nished the following appears…
The machine emits a tone.
Remove the milk container.
start
Rinse the container and fi ll it
with fresh water.
Insert the container and press
the button.
rinse the milk container
milk cleaning cycle
fill milk container with cold water
milk cleaning cycle
start rinsing cycle
milk cleaning cycle
5 64
10
Detergent residue or water may remain in the container during the wash and rinse cycles. In this case, empty the
container from any residue before fi lling it again.