44 ERROR CODES
GUIDE MESSAGE THAT APPEARS HOW TO REMOVE THE MESSAGE
restart the machine Turn off and after 30 minutes turn the machine on again
to restore normal operation.
call assistance Problem that requires the intervention of the customer
service center.
insert drip tray Insert drip tray under the brew group.
close coffee bean container Close the coffee bean hopper cover to be able to brew
any beverage.
add ground coffee This message guides the user when, in the customized
beverage programming, the use of this type of coffee has
been chosen.
insert brew group Insert the brew group in its place.
insert dreg drawer Insert the
grounds drawer.
empty dreg drawer Remove the
grounds drawer
and empty the grounds in
an appropriate container.
Note: The
grounds drawer
must be emptied only when
the machine signals to do so, and when the machine is
turned on.
Emptying the drawer with the machine turned off does
not allow the machine to register that it has been
emptied.
close side door In order for the machine to operate, the side door must
be closed.
refi ll water tank The tank must be removed and refi lled with fresh
drinking water.
empty drip tray Open the side door and empty the drip tray under the
brew group.
insert the milk container Insert the milk container in its compartment.
prime the machine Press on the display in order to proceed with manually
priming the water circuit. The machine performs an
automatic attempt to prime the circuit. If this attempt
does not perform correctly you must proceed with these
instructions.
circuit priming failure Contact the customer service center (toll free number) to
request assistance on how to resolve the problem.
the descaling cycle has not been completed
correctly
Repeat the operation as described in the descaling
section.
milk rinsing see page 13 and 27.
milk cleaning see page 13 and 28.
To Next Page
Loading...
