English
5
22
Remove the lid on the left-hand side by loosening the 2
screws.
Install the spacer on the left-hand side of the machine and
fix it using the 4 screws supplied.
The machine has two
different connectors, a
square-shaped one for the
"Apollo" payment system
and a rectangular one to
connect the coiner.
Place the wiring harnesses as shown in the figure and pass
the longer one through the hole.
Prepare the box containing the coiner.
The box is just a container
housing the coiner to
ensure its proper
installation and interface
with the machine.
To Next Page
Loading...
