English
5
23
The purchase and installation
of the coiner are at the service
provider's expenses.
Fix the coiner box to the spacer using the 2 screws supplied.
The connecting cable must be
properly inserted in the box.
After installing the box, install the coiner inside the box as
described in the instructions given in the coiner manual.
After installing the coiner in the box, close the box using
the key.
After installing the coiner, enable the products dispensed
upon payment and set their price. Access the
programming mode to carry out this procedure.
The machine allows you to
select a price line (0, 1, 2)
whose associated value is
set by the payment system
through a dedicated
software.
When the coiner is
installed, the milk container
should be placed on the
right-hand side of the
machine in order to
improve machine
operation. Install the
Cappuccinatore as
described in section
"Installing the
Cappuccinatore".
5.4.2 Installing the "Apollo"
System
The machine has been specially conceived and designed to
accommodate an "Apollo" payment system.
This system allows you to use prepaid cards for product
dispensing.
To Next Page
Loading...
