English
7
33
Put the filter into the empty tank. Press it to its limit stop.
Fill the tank with fresh drinking water and reinsert it into
the machine.
Press the "Coffee" button to confirm the introduction of
the new filter.
Remove and empty the drip tray.
When the drip tray is empty, refit it in the machine and
press the "Coffee" button to confirm that the procedure
has been completed.
Place a large container under the hot water wand.
Press the "Coffee" button to confirm.
Wait until the machine stops dispensing the necessary
water to activate the filter.
At the end of the cycle, remove the container previously
placed under the hot water wand.
At the end of the
procedure the display
automatically returns to
the product dispensing
page. If there is no water
filter, insert the small white
filter previously removed
into the water tank.
To Next Page
Loading...
