Settings · Configure Paper Settings 41
EN
CONFIGURE PAPER SETTINGS
Modifying the Basic Settings
SET PAPER WEIGHT
1
Press OK, 201 and OK.
2
Using [ select the weight of the inserted paper.
3
Confirm with OK.
SET PAPER SOURCE
Introduction
You can insert normal printing paper or printed doc-
uments (forms) into the paper tray. You can insert
special paper formats, envelopes, slides, sheets of
labels or printed documents into the manual paper
feed.
1
Press OK, 202 and OK.
2
Using [ select the paper source.
3
Confirm with OK.
Spaltenumbruch
SETTING THE PAPER FORMAT
1
Press OK, 203 and OK.
2
Using [ select whether you would like to config-
ure the paper format for the paper tray or whether
you would like to use the manual feed.
3
Confirm with OK.
4
Use [ to select the desired paper format. Follow
the specifications in the technical data.
5
Confirm with OK.
SET RESOLUTION
SETTING THE RESOLUTION FOR
SCANNING
1
Press OK, 303 and OK.
2
Select the desired resolution using [:
DRAFT—Greyscale scan with low resolution, for
instance, for using on the Internet.
TEXT—Black and white scan with medium resolu-
tion for text documents
GREY—Greyscale scan with medium resolution
PHOTO—Greyscale scan with high resolution, for
instance, for photographs
3
Confirm with OK.
SET RESOLUTION FOR FAX
TRANSMISSION
1
Press OK, 4013 and OK.
2
Select the desired resolution using [:
DEFAULT—For documents without special fea-
tures
FINE—For texts with small print or drawings
SFINE—For documents with many details
PHOTO—For photos
3
Confirm with OK.
SETTING THE RESOLUTION FOR THE
COPIER
1
Press OK, 103 and OK.
2
Select the desired resolution using [:
AUTO—Optimised adjustment for all types of doc-
uments
TEXT—For texts with small print or drawings
QUALITY—For documents with many details
PHOTO—For the highest resolution
3
Confirm with OK.
SETTING THE CONTRAST
SETTING THE CONTRAST FOR THE
SCANNER
1
Press OK, 304 and OK.
2
Set the desired contrast using [.
-/1—Reduces the contrast / typeface appears
lighter
4 (Factory settings)—Optimized adaptation for all
documents
+/7—Increases the contrast / typeface appears
darker (for example, documents with faint print)
3
Confirm with OK.
SET THE CONTRAST FOR FAXES AND
COPYING
1
Press OK, 104 and OK.
2
Set the desired contrast using [.
-/1—Reduces the contrast / typeface appears
lighter
4 (Factory settings)—Optimized adaptation for all
documents
+/7—Increases the contrast / typeface appears
darker (for example, documents with faint print)
3
Confirm with OK.
To Next Page
