44 Sagemcom · FAX 4560 · FAX 4565 · FAX 4570 · FAX 4575
EN
SET A THRESHOLD FOR PAGINATION
Set a Threshold for Pagination
Some fax transmissions contain more lines than can
be printed. Using the threshold for pagination, set
from which value these lines are printed on the sec-
ond page. All lines below this value are deleted.
1
Press OK, 4027 and OK.
2
Use [ to select from the following settings:
ON—All lines which lie more than three centime-
tres outside the page are printed on a second
page. All surplus lines below this value are
deleted.
OFF—All lines which lie more than one centimetre
outside the page are printed on a second page. All
surplus lines below this value are deleted.
3
Confirm with OK.
PRINTING MULTIPLE COPIES
Printing Multiple Copies
You can apply settings to your device whereby multi-
ple copies of fax transmissions are printed out upon
reception.
1
Press OK, 4022 and OK.
2
Enter a value from 1 to 99.
3
Confirm with OK.
Spaltenumbruch
LOCKING THE DEVICE
Locking the Device
With the locking function, you can prevent unauthor-
ised persons from using your device. Only after
entering of the correct code will it be possible to
access functions or enter numbers. The lock will turn
itself on again after each use of the device.
ENTERING THE PIN CODE
Default Access Code
1
Press OK, 921 and OK.
2
Enter a four-digit PIN code.
3
Confirm with OK.
4
Enter the code again for confirmation purposes.
5
Confirm with OK.
LOCKING THE KEYBOARD
Locking the Keyboard
This function locks the entire keyboard of the device.
1
Press OK, 922 and OK.
2
Enter the four-digit PIN code.
3
Confirm with OK.
4
Use [ to select whether you would like to turn
the function on or off.
5
Confirm with OK.
BLOCKING MANUAL DIALLING
Blocking Manual Dialling
This function blocks the manual dialling of tele-
phone numbers. Numbers from the telephone book
can be called. Manual dialling of emergency number
is
not possible.
1
Press OK, 923 and OK.
2
Enter the four-digit PIN code.
3
Confirm with OK.
4
Using [ select ONLY DIRECT..
5
Confirm with OK.
LOCK SETTINGS
Lock Settings
This function blocks the changing of settings on your
device.
1
Press OK, 924 and OK.
2
Enter the four-digit PIN code.
3
Confirm with OK.
4
Use [ to select whether you would like to turn
the function on or off.
5
Confirm with OK.
LOCK USB STORAGE MEDIUM
Lock USB Storage Medium
You use this function to block access to a connected
USB storage medium.
1
Press OK, 925 and OK.
2
Enter the four-digit PIN code.
3
Confirm with OK.
4
Use [ to select whether you would like to turn
the function on or off.
5
Confirm with OK.
PRINT LISTS AND REPORTS
PRINTING THE FUNCTIONS LIST
Printing the Functions List
Press OK, 81 and OK to print a list of all func-
tions of your device.
Printing the Functions List
To Next Page
