Chapter 2: Operation
10 General use and navigation
General use and navigation
Power on and volume in handset and speaker
The VHF radio has a dual-function on/off wheel knob for power
on/off and volume control.
To power on the VHF radio press the on/off wheel knob.
To power off the VHF radio, press and hold the on/off wheel
knob and follow the instructions in the display.
To adjust the speaker volume, turn the volume wheel knob (clockwise =
louder, counter clockwise = softer, until muted). When muted, is shown
in the display.
To adjust the volume of the handset earpiece see Radio setup on page 39.
Working channel and changing settings
Use the selector wheel knob to browse and select:
• To browse and select settings, turn the selector wheel knob
and press for accept.
• To select a working channel use the selector wheel knob or
enter the channel number using the keypad. You can change channels
whenever the channel designator is displayed.
A single, short press on the 16/C key always brings you to
channel 16, the international calling and distress channel,
no matter what state the radio is in.
To Next Page
Loading...
