Chapter 2: Operation
42 Setup
Power Supply
DSC setup
Para-
meter
Description
Monitor Set this to ENABLED if the radio is connected to a SAILOR 6081
Power Supply Unit and Charger.
Set this to DISABLED for any other power supply.
Status Visible if ENABLED. Current status of the connected power
supply.
Voltage Visible if ENABLED. Current voltage.
Current Visible if ENABLED. Current current.
DSC setting Description
Position Info Available position information.
Here you can enter position data, see also Position
and MMSI number on page 12.
DSC Groups Shows DSC groups. You can also add, edit, filter and
delete groups here.
Auto-Ack Test Auto-acknowledgement of test DSC messages.
OFF
ON (default)
Auto-Ack Polling Auto-acknowledgement of polling DSC messages.
OFF
ON (default)
Auto-Ack Position Auto-acknowledgement of position DSC messages.
OFF (default)
ON
To Next Page
Loading...
