Replacing the fuse in the SAILOR 6090 Power Converter
One fuse is installed in the SAILOR 6090 Power Converter. If the fuse is blown,
do as follows:
1. Track down why the fuse was blown and solve the problem.
2. Take out the old fuse.
3. Insert the new fuse. The fuse rating is 10 AT.
Warranty and returning units for repair
Should your SAILOR/EXPLORER/Thrane & Thrane product fail, please contact
your dealer or installer, or the nearest Thrane & Thrane partner. You will find
the partner details on www.thrane.com where you also find the Thrane &
Thrane Self Service Center web-portal, which may help you solving the
problem.
Your dealer, installer or Thrane & Thrane partner will assist you whether the
need is user training, technical support, PIN-codes, arranging on-site repair
or sending the product for repair.
Your dealer, installer or Thrane & Thrane partner will also take care of any
warranty issue.
To Next Page
Loading...
