Chapter 2: Operation
36 Phone book
Adding a contact to the phone book
To add a contact to the phone book do as follows:
1. Press the soft key PHBOOK. If it is not in the display, press the soft key
MORE until PHBOOK appears in the display.
2. Press the soft key ADD and fill in the details for the new contact.
3. Press the soft key SAVE to save the contact information.
4. Press the soft key EXIT to leave the phone book.
Contact Description
NAME Enter the name by turning the selector wheel knob to
the desired letter, press the selector wheel knob to
accept the letter and advance to the next letter. To
finish press the soft key OK.
TYPE Press and turn the selector wheel know to select SHIP,
GROUP or COAST STATION.
MMSI Turn and press the selector wheel knob to enter the
contact’s MMSI number (9 digits), press the soft key
OK to accept. For coast station contacts you can also
enter a DSC channel.
Ch (optional) Press and turn the selector wheel knob to select the
preferred channel for this contact, press the soft key
OK.
Position Auto Ack For SHIP or COAST STATION: Press and turn the
selector wheel knob to select YES or NO for this
contact, press the soft key OK. This will allow auto-ack
of position requests for this contact.
Listen to Group Still in? For GROUP: Press and turn the selector wheel
knob to select YES or NO for this contact, press the soft
key OK. The radio will respond to calls to the specified
group.
To Next Page
Loading...
