Thermo-hygrometer Transmitter installation. It is recommended you
mount the Thermo-hygrometer sensor outside in a shaded area. A north
facing wall is preferred because it is in the shade most of the day. Direct
sunlight and radiant heat sources will result in inaccurate temperature
readings. Although the sensor is water resistant, it is best to mount in a
well protected area, such as under an eve. Use a screw or nail (not
included) to affix the remote sensor to the wall, as shown in Figure 16.
Figure 16
6.Low Battery Icon
A low battery indicator icon is shown in the display window for thermo-
hygrometer sensor. When the low battery icon appears (the battery
voltage is lower than 2.4V), replace the batteries in the sensor with
fresh batteries. Be sure to never mix old and new batteries, and never
mix battery types such as alkaline and lithium together.
A low battery indicator icon is shown in the display window for
Integrated outdoor transmitter. When the low battery icon appears (the
battery voltage is lower than 3.6V), replace the batteries in the sensor
with fresh batteries. Be sure to never mix old and new batteries, and
never mix battery types such as alkaline and lithium together.
To Next Page
Loading...
