Press the MIN/MAX/- key again (do not hold), the MIN icon will be
displayed. Press the SET/MODE key to view min values of pressure
(ABS or REL), outdoor temperature/humidity(AT or dew point),indoor
temperature/humidity(temp or dew point), sensor temperature humidity,
sensor dew point(dew point or heat index).
Press the MIN/MAX/- key for three seconds to clear all min values.(the
pressure, temperature and humidity minimum values. The minimum
values will now display the current values).
Press the CHANNEL/+ button to switch the display between remote
thermo-hygrometer sensors 1 through 8 to view Min values.
Press the SNOOZE key to exit the min/max checking and cleaning
mode, return to normal display mode.
7.6 Snooze Mode
If the alarm sounds, and you wish to silence the alarm, press the
SNOOZE key, the backlight will turn on. The alarm icon will continue to
flash and the alarm will silence for five minute. press any key
(MIN/MAX/+ SET/MODE, ALARM,CHANNEL/+) to permanently exit
the Snooze mode.
7.7 Back light Mode
If the LED is off, Press the SNOOZE button once. The backlight will turn
on for five seconds, and if no operation is performed for three seconds,
the backlight will turn off.
The backlight operation is different when operating on batteries to save
power.
ADJUSTABLE BACKLIGHT BRIGHTNESS
There are 3 levels of brightness of backlight. When the backlight is on
press SNOOZE key to switch between the 3 levels.
When backlight is off, press and hold the SNOOZE key for two seconds,
the backlight will turn on permanently, and BL ON icon will be displayed
for three seconds in the date area.
To turn off the backlight at any time press and hold the SNOOZE key
for two seconds. BL OFF icon will be displayed for three seconds in the
date field.
To Next Page
Loading...
