The concept of apparent temperature (AT) is a linear regression that
is not restricted, and is more appropriate to outside conditions because
it includes wind. and was intended as an assessment of what exposed
body surfaces feel like in cold, windy conditions
Regression equations of this universal scale are formulated for indoors,
outdoors in shade but exposed to wind, and outdoors exposed to wind
and solar radiation. Of these, outdoors in shade but exposed to wind,
has been chosen as most informative.
15.5 Pressure Threshold Setting
The pressure threshold (the negative or positive rate of change of
pressure signifying a change in the weather) can be adjusted from 2
mbar/hour to 4 mbar/hour (default level 2 mbar/hour).
The lower the level pressure threshold setting, the higher sensitivity for
weather forecast changes. Locations that experience frequent changes
in air pressure require a higher setting compared to locations where the
air pressure is typically stagnant.
15.6 Restore Factory Default
To restore the console to factory default (WiFi network ,Weather server
and display), press the MIN/MAX/- key while installing the batteries at
the same time. Wait 3 seconds after installing the batteries to let go of
the MIN/MAX /- key.
16. Specifications
16.1 Wireless Specifications
Line of sight wireless transmission (in open air): 100m.
Frequency: 433 MHz
Thermo-hygrometer Transmitter update interval: 60 seconds
Integrated Outdoor transmitter interval: 16 seconds
16.2 Measurement Specifications
The following table provides specifications for the measured parameters.
To Next Page
Loading...
