8000m Series
- 8 -
■ Maintenance
◎Never touch the VFD the connection terminals when power is on. Otherwise it may
cause an electrical shock.
◎Only qualified electrical engineering personnal can be authorized to do the jobs of
maintenance, checking, or parts replacement.
◎After the power supply is OFF, make sure the charge LED is OFF , the residual voltage
is not exist, or wait at least 10 minutes, before carrying out maintenance or inspection.
Otherwise it may cause damage or injury.
◎PCB has CMOS integrated circuit parts, never touch with bare hand, or static electricity
may cause damage to the PCB.
■ Other
◎Modification to the VFD without permission is strictly prohibited, otherwise can cause
severe injury. Arbitrarily modification of VFD will result in service guarantee voided.
To Next Page
Loading...
