SAJ CHS2 Series - Page 16

CHS2 Series
23
24
Forklift transportation:
Move the cabinet and place it over the drilled holes. Adjust the width of the forklift legs so that the center of
gravity is in the center of the forklift legs. The forks should completely fit the bottom of the cabinet without
damaging the cabinet. The forklift load capacity must be greater than 2 tons, and the fork depth must be
greater than 1.2m.
Figure 4.6
Forklift transportation
Step 3: Use the wrench to secure the bottom with the expansion bolts (M12*80).
Figure 4.7
Securing the base