SAJ Suntrio Plus Series User Manual

Suntrio Plus Series
-
43
-
2.Press▼and then press ENT
to enter into “PV Mode
Setting”. Press▲and ▼to
choose PV mode.then choose
to confirm.
1-- PV1,PV3,PV2
independent
2--PV1//PV2; PV3
independent
3--PV1//PV3; PV2
independent
4--PV2//PV3; PV1
independent
5-- PV1//PV2// PV3
Attention: This mode shall be
set before the inverter is
connected to the power grid,
and don’t set it when the
inverter is being connected to
the grid.
6.2.5 Inquiry of Parameters of Inverter
1. Inquiry of Operating Parameters
1. In the main LCD interface,
press “ENT” button, then press ▶
to enter into “Parameters”.
2. Press ENT to enter into
“Run-Info”, then press ▼or▲to
select the needed
parameters,press ENT to enter
and to check the parameters.
2. Inquiry of the Information of Inverter
Power
1230W
E-Today
11.
33 kWh
T
-Today
1
.7 h
T-Total
4
.6 h
15-
07-09 15：47
Graph Setting Run
-Info
About
0
3.7
7.4
11.1
14
.8
18.5
22
.2
25.9
29.6
kW
33.3
3
5 7 9 11 13 15
17 19 21h
E-Total
14
.35 kWh
E-Today 11
.33 kWhNormal
DC-Parameters
Error-Records
Module-Inform
Exit
AC
-Parameter
Power
1230
W
E-Today
11.33 kWh
T-Today
1.7 h
T-Total
4.6 h
15-07-09 15：47
Graph Setting Run-Info
About
E-Total
14.35 kWh
Chang PasswordNormal
Cancel
PV Mode Setting
Ok
1
PV Independent

SAJ Suntrio Plus Series Specifications

General

Brand	SAJ
Model	Suntrio Plus Series
Category	Inverter
Language	English