SAJ Suntrio Plus Series - Page 45

Suntrio Plus Series
-
44
-
1. In the main LCD interface,
press “ENT” button, then press ▶
to enter into “About”.
2. Press ENT to enter into
“About” to check the equipment
type, series number, machine
code, software version of display
panel, mainframe version of the
control panel and the settings of
country.
6.2.6 Self test of the Inverter
LCD Display
Operation Steps
Self test
Self test
Press “◄”and“ENT” at the
same time to enter Self
Test.
Note:1.This setting only
appears when the grid
compliance selects Italy.
2.This setting shall be
operated when the inverter
is under normal
grid-connected state.
Power
1230W
E-Today
11.33 kWh
T-Today
1.7 h
T-Total
4.6 h
15-07-09 15：47
Graph Setting Run-Info
About
0
3.7
7.4
11.1
14.8
18.5
22.2
25.9
29.6
kW
33.3
3 5 7 9 11 13 15 17 19 21h
E-Total
14.35 kWh
E-Today 11.33 kWh
Normal
Power
1230W
E-Today
11.33 kWh
T-Today
1.7 h
T-Total
4
.6 h
18-11-09 15：47
Graph Setting Run-Info
About
E-Total
14
.35 kWh
E-Today 11.33 kWhNormal
Return
Ovp（59.S2）test
Ovp10（59.S1）test
Uvp（27.S1）test
Uvp2（27.S2）test
Ofp（81>.S1）test
Ofp2（81>.S2）test
Ufp
（81<.S1
）test
Ufp2（81<
.S2）test
ALL test