◎“ STOP/RESET” key may become invalid as a result of some function setting.
It is recommended to install an independent emergency circuit breaker for the
AC Drive control system, otherwise, or personal injury may be caused.
◎When the power is on, there may be electricity in the AC Drive’s terminals
even if it is in stop mode. Do not touch U, V, W terminals and motor connection
terminals, or electrical shock may be caused.
◎Never touch the AC Drive connection terminals when power is on. Otherwise,
it may cause an electrical shock.
◎Only qualified electricians can be authorized to do the jobs of maintenance,
checking, or parts replacement.
◎After the power supply is OFF, make sure the charge LED is OFF and the
residual voltage does not exist, or wait for at least 10 minutes before carrying out
maintenance or inspection. Otherwise, damage or injury may be caused.
◎Modification to the AC Drive without permission is strictly prohibited,
otherwise, severe injury may be caused. Arbitrarily modification of AC Drive
will result in service warranty invalid.
To Next Page
Loading...
Need help?
General
