EasyManua.ls Logo

Sako SKI600 - Page 86

Sako SKI600
180 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
080
1: not save
Once power on, the keypad and terminal
frequency increment will be initialized to 0.
LED tens digit: keep when stop
0: keep when stop
When the VFD stops running, the frequency
set value stays the last modi󽗉ed value.
1: not keep
When the VFD stops running, the set
frequency returns to F0.12.
LED hundreds digit: UP/DOWN
frequency adjustment
0: invalid
1: valid
When valid, operating with key
terminal UP/DOWN can achieve the positive
or negative adjustment of the frequency.
LED hundreds digit: UP/DOWN
frequency adjustment
0: invalid
1: valid
When valid, operating with key ,
terminal UP/DOWN can achieve the positive
or negative adjustment of the frequency.
▲/▼
▲/▼
When frequency channel is de󽗉ned as digital
given 1 (principle and auxiliary frequency
source are both 0), this function parameter
is initial setting frequency given by keypad
digital frequency.
F0.12
Frequency source digital setting 1
0.00Hz ~【F0.16】upper
limit frequency
50.00
LED units digit: power down save
0: save
Once power on, the keypad and terminal
frequency increment will be initialized to
the value saved in EEPROM when power
down last time.
1: not save
Once power on, the keypad and terminal
frequency increment will be initialized to 0.
LED tens digit: keep when stop
0: keep when stop
When the VFD stops running, the frequency
set value stays the last modi󽗉ed value.
1: not keep
When the VFD stops running, the set
frequency returns to F0.12.
F0.11
Digital frequency set 2 control
000 111 000
▲/▼
▲/▼
4.2 Detailed Function Description
When frequency channel is de󽗉ned as digital
given 2 (principle and auxiliary frequency
source are both 1), this function parameter is
initial setting frequency given by VFD terminal.
F0.13
Frequency source digital setting 2
0.00Hz ~【F0.16】upper
limit frequency
50.00
K is the weight coefficient of auxiliary
frequency source, valid when F0.09 is 1 8.
F0.14
Auxiliary frequency source weight
coe󽗋cient K setting
0.01 10.00 1.00
F0.15
Max. Output Freq.
Low freq. stage: MAX{50.00,
【F0.16】}~ 300.0
High freq. stage: MAX{50.00,
【F0.16】}~ 3000.0
50.00

Table of Contents

Related product manuals