ENGLISH
22
11 RECYCLINGANDENDOFPRODUCT LIFE
Attheendoftheservicelifeoftheequipmentoritsparts,
the relevant mate rials and parts should berecycled or
disposedof using an environmentallyacceptable method
and in compliance with local regulations. If the pump
contains substances thatare harmful to theenvironment, these should
beremovedfromthepumpanddis
posedofincompliancewithcurrent
local regulations. This also applies to liquids and/or gases that may be
usedinauxiliarysealingsystems.
Even when dismantled from the process line the pump may
contain a partofpumped fluid. Makesure that dangerousliquids
havebeeneliminated.Securityrequirementsavailableinthefluidsa
fety
datasheets should be respected. Suitable personnel protective
equipmentshouldbeusedwhendismantlingthepump.
12 SPAREPARTS
12.1 SECTIONAL DRAWING AND BILL OF
MATERIAL
Thepump sectionaldrawing and billof material is available upon
request. The demand shouldbe sent toour Spare parts Dpt. and
shouldmentionpumpdes criptionandserialnumber.Dataareengraved
on the pump name plate and available in the acknowledgement of
order.
12.1.1 SECTIONALDRAWING
12.1.2 BILL OFMATERIAL
Item Description
1100 Casing
1139 Suctionflange
1221 Casingcover
1230 Visitport
1381 Dischargeflange
1915 Wearplate
2100 Bearingbracketshaft
2200 Impeller
2911 Impellerwasher
2912 Impellernut
3011 Ballbearing
3134 Supportfoot
3160 IECadaptorflange
3190 Motorpedestal
3200 Bearinghousing
3260 Bearingcover
3851 Automaticgreasingcartridge
3852 Greasingnipple
3853 Fitting
4011 Intermediateflange
4200 Mechanicalsealassembly
4211 Mechanicalsealhousing
4510 Gasket
4522 Suctionflangeflatgasket
4523 Visitportflatgasket
5420 Non‐returnvalveassembly
6511 Fillingplug
6515 Drainplug
6521 Plug
6544 Elasticring
6570 Screw
6572 Studbolt
6580 Nut
6710 Key
6742 Key
7200.1 ½coupling(pump)
7200.2 ½coupling(motor)
7310 Couplingflexiblepart
8020 Longshaftmotor
8100 Motor
A1 Anode
To Next Page