ENGLISH
23
12.2 SPAREPARTS
During warranty period the use of genuine pump parts is
mandatory.Itis highlyrecommendedtodosoevenafterwarranty
periodends.
Your request for spare parts can be sent to your local Salmson
distributor or to our Spare Parts Department through our Salmson
Hotline.
Incaseofinquiry,pleaseindicate:
Se
rialnumber,
Completepumpdescription,
Itemordescriptionoftherequestedsparepart(s).
Theserialnumberofthepumpisengravedonthepumpnameplate.
12.3 RECOMMENDEDSPAREPARTS
When the pump runs on the selected duty point, maintenance
operations are very limited.To reduce risk of unexpected maintenance
operationsitisrecommendedtocreateandfollowamaintenanceplan.
In any case, following spare parts should be kept on stock to ensure a
quickre‐start:
Mechanicalsealorasetofpackingri
ngs,*
Setofbearingbracketballbearings*,
Setofshaftbearing*,
Setofmotorballbearings(forframesize>90),
Completesetofsealsandgaskets,
Couplingelasticpart(s)*,
Automaticgreasingcartridge*.
(*): some parts may not conc
ern your pump. Our Spare Parts Dpt will
confirm pump bill of material according to the serial number engraved
onpumpnameplate.
12.4 RECOMMENDED SPARE PARTS FOR 2
YEARSOPERATION
Spare parts list can be erected using the recommended list
availableintheDIN24296.
For example, recommended spare parts and quantities for one or two
pumpsinstalled(tobeadaptedaccordingthepumpdesign):
‐ Impeller:1(or1set),
‐ Shaft:1,
‐ Impellernut:1,
‐ Shaftseal:2,
‐ Beari
ngbracketballbearing:1ofeachtype,
‐ Bearing*:1ofeachtype,
‐ Casing/stageseal:4completesets,
‐ Mechanicalseal:1,
‐ Packingring*:2sets,
‐ Automaticgreasingcartridge*:2.
(*): some parts may not conc
ern your pump. Our Spare Parts Dpt will
confirm pump bill of material according to the serial number engraved
onpumpnameplate.
13 CEDECLARATIONOFCONFORMITE
To Next Page