PROFILES:
The ERT50 230v has a number of preset profiles that
simplify installation and setup. The profiles contain
default settings that should meet the majority of needs in
a range of environments, meaning that the controller can
work ‘out of the box’ with no reprogramming. The five
preinstalled profiles are:
FAMILY
SINGLE
OFFICE
NAME 1
NAME 2
Each profile has settings for 7 weekdays, 6 different times
of day and 3 different temperature zones:
Time of Day Start End
Early Morning 06:00 08:00
Morning 08:00 12:00
Noon 12:00 14:00
Afternoon 14:00 18:00
Evening 18:00 23:00
Night 23:00 06:00
Temperature Zone Setting
(heating mode)
Standard 20.0 °C
Comfort 24.0 °C
Reduced 16.0 °C
Programming the ERT50 230v is very easy, and only needs
you to select a combination of times of day and
temperature zone, as in these examples:
ERT50 230v INSTRUCTION MANUAL
19
To Next Page
Loading...
