ERT50 230v INSTRUCTION MANUAL
26
Each profile contains the settings for the six times of day
for each day of the week and connects one of the three
temperature zones to each programmed step.
First of all choose if you want to program weekdays,
weekends or individual days of the week - you can also
start with weekday settings and later change the settings
for a single day, or start with Monday and copy these
settings into the other days.
Next, you can set the switching point for the time of day:
For every time of day you need a Start and End time (there
cannot be any gaps between each End time and the next
Start time).
To Next Page
Loading...
