DIP Switch Settings
The DIP switches are found on the rear of your thermostat and can be used to change the span (temperature
accuracy) of your thermostat from the default +/-0.5°C to +/-0.25°C and the programmes 5-2 or 24h.
Changing the Span DIP Switch (2) may cause your boiler to operate more frequently. The DIP switches are
located on the back of the thermostat.
24H
5-2
+/-0.25
+/-0.5
ON
1
2
After finishing all the settings and creating all the terminal connections, please fix the thermostat on the wall.
Fix the backplate
to the wall
Align the front housing
at the top edge
.
06 RT510 Installation Manual
To Next Page
Loading...
