Salus RT510 Installation Manual

Installer Mode
RESET
+Hr
SELECT SET
RESET
+Hr
SELECT SET
3 Sec
3 Sec
3 Sec
RESET
+Hr
SELECT SET
Press and hold all three
buttons together for 3 sec
.
Press Set in order to
changed the setting.
RESET
+Hr
SELECT SET
0. 5
°C
Press Up/Down to select
the desired value.
For any advanced settings please access the Installer Mode. Here you will have the possibility to adjust
your frost setpoint, to set the temperature offset and also to choose from two temperature increments.
Please follow the steps below in order to modify the installer parameters.
dxx Function Parameter Description Default
value
d01
Temperature display
increments
0.1 or 0.5°C
Select temperature display
increments
0.5°C
d02 Temperature oset +/-3.0°C
Calibrate your thermostat
temperature
0.0°C
d03 Frost setpoint 5.0-17.0°C Set the Frost Point temperature 5.0°C
1 2
3 4
RT510 Installation Manual 09

Salus RT510 Specifications

General

Temperature Accuracy	±0.5°C
Frequency	868 MHz
Display	LCD
Mounting	Wall Mounted
Switching Voltage	230 V AC
Frost Protection	Yes
Battery Backup	Yes
Type	Digital Thermostat
Power Supply	2 x AA Batteries
Switching Current	3A
Programming	5/2 day or 7 day programming
Compatibility	Compatible with most heating systems