1-3
Section 1
SC102ZB/ST103ZB Installation and Operation Manual
Introduction
SALUS Smart Home Application
Use SALUS Smart Home to:
• Quickly view and monitor the status of your home and smart devices
• Set schedules and preferences for your connected thermostats, smart
plugs and more
• Receive important real-time alerts and notications of any changes
with your system
Download the SALUS Smart Home application on
your IOS or Android device for remote access to
your home comfort system. After downloading
the application, follow the steps in section 4.1.1
to create a user prole and set up an SG888ZB
Gateway.
Apple, the Apple logo, iPhone,
and iPod touch are trademarks of
Apple Inc, registered in the U.S.
and other countries. App Store is a
service mark of Apple Inc, registered
in the U.S. and other countries.
Codes & Regulations: Installation and setup of this product must be performed in strict
compliance with country, state/province and local regulating agencies and codes that
deal with Class B digital devices. In the absence of local requirements, the FCC rules, listed
below, are to be followed.
Intended Use: The SALUS SC102ZB Wireless Fan Coil Controller and ST103ZB Wireless
Fan Coil Remote are intended for interior room temperature control in conjunction with
hydronic fan coil heating systems only. Other uses are not recommended or supported.
Installer or Contractor: Record parameters at startup and any subsequent parameter
changes in the installer notes section of this manual.
Product Safety Information
Google Play and the Google Play logo
are trademarks of Google LLC
To Next Page
Loading...
Need help?
General
