Salus ST103ZB - 2 Included Parts;Tools

Section 2
SC102ZB/ST103ZB Installation and Operation Manual
Included Parts/Tools
Review Parts
Be sure that all parts listed for each device are included and available before start installation.
SC102ZB Wireless Fan Coil Controller
Required Tools
• #1 Phillips or athead screwdriver • 3/16” drill bit & drill (if anchors are required)
Optional Tools (for SC102ZB)
• Smartphone or digital camera for wiring reference photos
• Small screwdriver for removing wiring from old thermostat terminals
• Pencil for holding wires in place during installation
2-1
Wiring Labels
Screws and
Anchors
Controller with Wiring Mount
Installation/
Quick Start Guide
Desk Stand Screws and
Anchors
Remote with Batteries
and Wall Mount
Installation/
Quick Start Guide
ST103ZB Wireless Fan Coil Remote
SS909ZB Remote Temperature Sensor
Stand Mounting
Kit
Temperature Sensor with
Battery and Wall Plate
Installation/
Quick Start Guide