•
••
• 60 Program Mode
Function Key – Status
The functions can be tailored using the following options. For each option set
there are multiple questions answered by entering 0 or 1. The choices must be
answered at the same time resulting in an entry of 0’s or 1’s.
•
Move
to the PGM position
• Enter 70 and press the SUBTOTAL key
• On the number keys type in the answers to create the full code from the
answers table shown below.
I.e. Answer
abcdefg
etc as 1000000 to set compulsory tender on CASH/TEND key
• Press the Key to be set with the options
• Press the CASH/TEND key and return to the REG position
Cash / Cheque / Charge -
answers table
Answer Question Explanation
a
1 Compulsory amount This forces a tender operation
b
0 Not Required enter 0 Enter 0 for this field
c
1 Disable amount under total This prevents a tender less than the sale total
1
Exempt for Tax 1
This prevents tax 1 rate being applied in the sale
1 Exempt for Tax 2 This prevents tax 2 rate being applied in the sale
f
1 Exempt for Tax 3 This prevents tax 3 rate being applied in the sale
g
1 Exempt for Tax 4 This prevents tax 4 rate being applied in the sale
* for normal operation enter 0 to any question a to g
No Sale / Return / Void / Tax / Rcpt On/Off / Calc / RA / PO –
answers table
a 1 Prevent key operation This will stop the key operating
* for normal operation enter 0 to any question a
% or (-) –
answers table
a
0
1
Preset % or (-) rate
Manual entered % or (-)
This sets if the key will have preset rate
b
1 Taxable by Rate 1 If set the discount amount is taxable by rate 1
1 Taxable by Rate 2 If set the discount amount is taxable by rate 2
d
1 Taxable by Rate 3 If set the discount amount is taxable by rate 3
e
1 Taxable by Rate 4 If set the discount amount is taxable by rate 4
f
1 Prevent key operation This will stop the key operating in any capacity
* for normal operation enter 0 to any question a to f
To Next Page
Loading...
