Sam4s ER-390M - Page 191

Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU Program Mode Programming • 181
Descriptor - Programs 80 (PGM-Mode) for No Sale
- Refer to “Program 80 - Function Key Descriptor”
Descriptor - Programs 81 (PGM-Mode) for Non Add#
If you are programming using alpha overlay, type up to 18 descriptors on the overlay and
press the X/TIME key and then press the function key you are programming.
NOTE: As you are entering descriptors only the last 16 descriptors will display.
or,
If you are programming using descriptor codes, enter up to 18 three-character codes and
press the function key you are programming key.
1 SUBTL8
Type up to 18 / 12 (ER-230)
descriptor keys
CASH X/TIME
FUNCTION
KEY
Enter up to 18 / 12 (ER-230)
three-digit character codes
1 SUBTL8
CASH
FUNCTION
KEY