Sam4s ER-390M - CONV (1 ~ 4) (Currency Conversion)

Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU Program Mode Programming • 191
CONV (1 ~ 4) (Currency Conversion)
Currency Conversion Rate - Program 90 (PGM-Mode)
1. Turn the control lock to the PGM-Mode.
Switch to P Mode by press MODE function key. (For ER-230)
2. To begin the program, enter 9 0, press the SUBTL key.
3. Enter the exchange rate of up to 7 digits (do not enter the decimal point), and then enter
a number from 0 to 7 to indicate the decimal position. See " Currency Exchange Rate
Programming Examples" below.
4. Press the function key on the keyboard you wish to program.
5. To program additional function keys, repeat from step 3, or press the CASH key to
finalise the program.
Currency Exchange Rate Programming Examples
NOTE: Foreign currency exchange rates may be stated as “foreign currency in dollars”, or
“dollars in foreign currency”. Use the rate stated in “dollars in foreign currency”
when you are programming this section.
The US dollar (home currency) is worth 1.3720 Canadian dollars (foreign currency).
The US dollar (home currency) is worth 110.24 Japanese Yen (foreign currency).
Exchange Rate
4 3 7 2
Decimal
Position
0 1
Exchange Rate
2 1 0 2
Decimal
Position
4 1
CASH
FUNCTION
KEY
Exchange Rate
Decimal
Position
0 SUBTL9