Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU Program Mode Programming • 221
Group Programming
Up to 99 Group totals are available to accumulate totals of individual PLUs that are assigned to each
group. Numbers of group can be modified in Service Mode Programming, Program 60 - Memory
Allocation. Each PLU can be assigned to one, two or three different groups. (See Program Mode
Programming, Program 150 - PLU Group Assignment. However, only the Group assigned as the
first group will have an effect on the Kitchen Printing programming as assigned.
• Program 900 - Group Status Programming allows to assign a group status, i.e. a group can
be set to not add to the total of all groups, or a group can be used to designate like items for
kitchen printer assignment.
• Program 910 - Group Descriptors Programming to assign a unique descriptor for each
group, so that the group may be easily understood on the group report.
To Next Page
Loading...
