2 • Getting Started ER420 Series
Unpacking
1. Unpack and unwrap the cash register.
2. Located in the packing are the following items:
• 1 Rolls of paper and paper spindle,
• 2 sets of control keys,
• Operation and Program Manual,
3. Remove the cardboard protectors from the cash drawer.
4. Plug the register into a grounded outlet (three prong), insert a control key and turn
the key to the REG control lock position.
Installing the Paper
1. Remove the printer cover.
2. For proper feeding through the print head, cut or tear a straight even edge on the end
of the paper roll. (Be sure to remove any paper with glue residue.) Place the paper
roll in the paper holder so that the paper will feed from the bottom of the roll.
To Next Page
Loading...
