Sam4s ER-655II - PC Schedule Time

SAM4s ER-655II v1.2 Program Mode Programming  223
PC Schedule Time
To be polled by a PC, the register must be placed in the PC ONLINE MODE.
You can place the PC in ONLINE MODE manually by selecting the PC COMMUNCATION
function from the RESET REPORT MODE menu. If you wish to do unattended polling, you
can program the ER-650 to automatically enter the PC ONLINE MODE at a scheduled time.
You must also configure one of the RS232C ports for PC communications. See the "Service
Mode Programming" chapter in this manual.
1. From the PGM control lock position menu, press 00 for MORE. The
PROGRAM MODE page 2 screen displays. Press PAGE DOWN to view the
remainder of the page 2 program options.
2. From the PROGRAM MODE page 2 screen, press 8 for PC SCHEDULE
TIME. The PC SCHEDULE PROG. screen displays:
PC SCHEDULE PROG.
SET TIME : HH:MM
(MILITARY) 00:00
3. Type the time you wish to enter PC Communication mode, press ENTER.
Note: PC polling cannot be performed without optional polling software. Please contact
your authorized SAM4s dealer for information.