Sam4s ER-655II - Tendering a Charge Sale

SAM4s ER-655II v1.2 Operating Instructions  57
Tendering a Charge Sale
Tendering a charge sale may or may not be allowed. See "Function Key Programming" in
the "Program Mode Programming" chapter to set tendering options for the charge keys, i.e.
whether to allow over tendering or to enforce tendering.
1. Register the items you wish to sell.
2. Enter the amount of the charge and press
one of the charge keys if it is located on
the keyboard:
0 002
CHARGE
1
or, if the charge function is located on a
function look up key, enter the amount of
the charge:
0 002
Press FUNCTION LOOK2, then press
the digit representing the charge function
you are using:
FUNCTION
LOOK#2
1
THANK-YOU
CALL AGAIN
08/15/1999 SUN TIME 08:33
PLU1 T1 $2.99
PLU1 T1 $2.99
4X $1.99
PLU2 $7.96
TAX1 $0.36
TOTAL $14.30
CHARGE1 $20.00
CHANGE $5.70
CLERK 1 000011 00001