HCUBE-102S User Manual
Tick “Beeping after Cutting” (The beeping time, times and interval time can be set for what
you want, such as 1 milliseconds, 2 milliseconds or 3 milliseconds, etc.):
The following setting is set as an example:
When cutting one piece of paper each time, the printer will emit the “Beep” for one time,
and the beeping time is two milliseconds and beeping interval is three milliseconds.
Other
Click the items to set “Print Density”, “Paper Width”, “Auto Line Feed”, “DPI Mode”, “USB Port
Mode”, and “Paper Type”
• Print Density
The print density value varies according to the paper material and it can be adjusted to suit
your needs.
To Next Page
Loading...
