Rear power take-off
Engine speed power take-off
The engine-coupled rear P.T.O. can be equipped with a mechanically or electrohydraulically operated clutch.
The P.T.O. shaft can be operated at 540 or 1000 rev/min, engaged by means of a first selector. A second selector
allows operation of the P.T.O. in standard mode (540/1000) or ECONOMY mode (775/1300).
Both selectors utilize a sliding sleeve with a radial coupling action.
The control linkage is mechanical and must be operated with the parts motionless.
The P.T.O. shaft rotates clockwise as viewed from the rear of the tractor.
Fig 1 - Longitudinal section through rear implement and live P.T.O. unit -
SILVER 100.6.
transmission
power take-off
36
3
164
www.maskinisten.net
www.classicmachinery.net
To Next Page
Loading...