20/11/2020 582156110-EN-indC-Pump-20F50 pH.docx
12
Injection hazards
‘HIGH PRESSURE’ technology requires the utmost care.
Its operation can lead to dangerous leaks. In this case, there is a risk of
injecting material into exposed body parts, which can lead to serious
injury and amputation:
An injection of fluid into the skin or other parts of the
body (eyes, fingers …) must be treated urgently by
appropriate medical care.
Do not look at the gun nozzle when it is under pressure.
Never direct the jet to another person.
Never try to stop the jet with the body (hands, fingers,
…) or with rags or similar.
Fire hazards, explosion,
electric arc, static
electricity
Incorrect grounding, insufficient ventilation, flames or sparks can
cause an explosion or fire that could result in serious injury.
In order to avoid these risks, especially when using pumps, it is
imperative:
to ground the equipment, the parts to be treated, the
cans of products and cleaners,
to ensure good ventilation,
to keep the working area clean and free of rags,
apers, solvents,
do not operate electrical switches in the presence of
vapors or during removal,
to immediately stop the application in the presence of
arcs,
to store all liquids outside of the working areas.
to use material with the highest possible flash point to
avoid any risk of formation of flammable gases and
vapors (refer to product safety data sheets).
to equip the drums with a lid to reduce the diffusion of
gases and vapors in the cabin.
it is forbidden to pump explosive materials.
To Next Page
Loading...
