582156110-EN-indC-Pump-20F50 pH.docx 20/11/2020
53
This maintenance consists of replacing parts with cuts or wear and
cleaning organs with compatible products without using abrasive
materials that could damage them.
The O-rings are mounted with special "pneumatic" grease.
Make sure that none of them get damaged; cutting one of them may
cause the motor to malfunction.
12.2 Preventive maintenance
It is recommended to schedule a routine maintenance after a set
number of hours of operation.
This is defined by the user's maintenance department and is based on
the product, the work rate and the usual pressure.
Be aware of the disassembly / reassembly of the pump and spare
parts.
Instruction Designation Part number
PTFE grease PTFE grease (10 ml / 0.34 oz) 560.440.101
Isoflex grease Box of grease (1 Kg / 2.2 lbs) 560.440.003
Anti-seize grease Box of grease (450 gr / 1lb) 560.420.005
Medium strength
Aneorobic Pipe sealant
Loctite 5772 (50 ml / 1.7 oz) 554.180.015
To Next Page
Loading...
