582156110-EN-indC-Pump-20F50 pH.docx 20/11/2020
23
5.2 Description of the main elements of the system
Pump, model 20F50 pH
Expected use
The pump is recommended for water-based or solvent-based paints
whose viscosity is lower than 1000 mPa/s.
The pump consists of a motor, model 500-4 and a fluid section,
model F50 pH. The wall mounted version has an air equipment and a
fluid filter 3/8", model 250 bar / 3625.75 psi.
To Next Page
Loading...
