582156110-EN-indC-Pump-20F50 pH.docx 20/11/2020
9
3 Safety instructions
3.1 Personal safety
Overview
Read all operating instructions and device labels carefully
before putting the equipment into service.
Personnel using this equipment must have been trained in its use.
The workshop manager must ensure that the operators have fully
understood all the instructions and safety rules of this equipment and
other elements and accessories of the installation.
Misuse or operation can cause serious injury. This equipment is for
professional use only. It must be used only for the purpose for which it
was intended.
Do not modify or transform the equipment. Parts and accessories must
only be supplied or approved by SAMES KREMLIN.
The equipment must be checked periodically. Defective or worn parts
must be replaced.
Never exceed the maximum working pressures of the equipment
components.
Always respect the laws in force regarding security, fire, electricity of
the destination country of the equipment.
Only use fluids or solvents that are compatible with the parts in
contact with the material (see material manufacturer’s technical
data sheet).
To Next Page
Loading...
