20/11/2020 582156110-EN-indC-Pump-20F50 pH.docx
34
Connections
Bare pump :
Air Inlet : F 1/4" BSP
Fluid Inlet : F 1/2 BSP
Fluid Outlet : F 3/8 NPS
Pump assembly :
Air Inlet : F 3/8" G (air supply)
Fluid Inlet : M 26 x 125 + suction rod (fitting F 26 x 125)
Fluid Outlet : M 1/2 JIC (filter outlet)
Connection hoses
Pump air supply hose (minimum Ø for a 5 m / 16.5 ft
length : Ø 16 mm iD / 5/8" dia
Air hose (between "GUN AIR" regulator and gun) : Ø 7
mm ID / 1/4" dia.
AIRMIX fluid hose (between pump fluid outlet and
gun) : Ø 4.8 mm ID. / 3.16" dia.
To Next Page
Loading...
